Pale Wood -effect: A pale wood -effect wood-effect Laminate is the Flooring in this room. Laminate is relatively inexpensive, easy to lay and, treated right, hard wearing. Because it's made by bonding (laminating) a thin strip of wood-effect material to boards, it has to be protected from water which can cause the two layers to warp and come unstuck. So, although it is suitable for a kitchen, it's a good idea to mop up any spills as soon as they happen.
pale wood -effect wooden units help make even the smallest room bigger, and sexy handles with a textured design give them an extra shot of style. Two basket drawers add further character to this tiny room without sacrificing storage space or interrupting the streamlined effect. A black granite-effect worktop is perfect here, a welcome note of dark colour that perfectly divides the lilac and pale wood -effect wood colours and gives the small room impact.See Also Wood Graining:wood graining or marble graining always ends with each separate piece of wood graining or marble. In the adjoining piece the graining commences in a different pattern or direction.
To be in good taste, painting made to imitate wood graining or marble must create a complete illusion, and the work must be very realistic.
There are a number of techniques that are effective on wood graining. These include graining, dragging, marbling, and tortoiseshelling, Graining is probably the least complicated of these but, with time and patience, the other finishes can look quite stunning. All these finishes are achieved by the careful use of a background paint colour followed by a painted top coat, or an oil-based glaze which is tinted and then thinned. Always remember to prime raw wood graining before painting on it.
On The Other Hand See Color Of Wood:All finishes alter the color of wood to some extent, and some woods - Mahogany and walnut, for example - turn much darker even when a completely clear finish is applied.
An approximate idea of the color wood will take on when treated with a clear finish can be seen by dampening a small area with ordinary water. If this color is too light for your needs, then the wood can be stained before finishing. It is only possible to stain wood to a darker color; for a lighter shade it must be bleached.
The final finish may be of a type that gives a surface film, such as French polish, varnish, or polyurethane. The latter two are available in gloss, satin, and matte finishes. Varnish stains are also available. These are convenient, since they will color and finish the wood in a single operation.
Do bear in mind that each extra coat of varnish stain will darken the color of the wood and, unless brushed out very evenly, the color will vary with the thickness of the film. When wood is stained with a penetrating dye, the color will not vary - no matter how many coats of clear finish you later apply.
|
