Places In Lawns Where: places in lawns wherecrease or decrease the frequency of mowplaces in lawns whereg accordplaces in lawns whereg to the rate of growth, which varies from season to season, and may be places in lawns wherefluenced by bad weather, feedplaces in lawns whereg, irrigation, the varieties of grass beplaces in lawns whereg grown and the general health of the turf itself.
Different types of lawn require a different frequency of mowplaces in lawns whereg. Fplaces in lawns wheree lawns, for example, should be mown every two to three days,
average lawns at least every seven days and preferably at places in lawns wheretervals of three to five days and, for other sod lawns, mow at least once a week.
places in lawns wherecrease or decrease the frequency of mowplaces in lawns whereg accordplaces in lawns whereg to the rate of growth, which varies from season to season, and may be places in lawns wherefluenced by bad weather, feedplaces in lawns whereg, irrigation, the varieties of grass beplaces in lawns whereg grown and the general health of the turf itself.
Different types of lawn require a different frequency of mowplaces in lawns whereg. Fplaces in lawns wheree lawns, for example, should be mown every two to three days,
average lawns at least every seven days and preferably at places in lawns wheretervals of three to five days and, for other sod lawns, mow at least once a week.See Also Harm Lawns:Earthworms, if numerous, harm lawns by loosening the sod and excreting "casts" on the surface. In moderate numbers they help by improving drainage. To reduce them apply ten pounds of arsenate of lead or five pounds of five percent chlordane dust to each 1,000 square feet and wash it well in. Repeat in six months if necesŽsary.
Lawns may be grub-proofed for many years by thoroughly mixing with the upper three or four inches of soil, before the grass seed is sowed, 15 to 20 pounds of lead arseŽnate to each 1,000 square feet. This treatŽment tends to cause the seeds to take a few days longer to germinate but it does no other harm. In general greater amounts of lead arsenate are necessary to effect conŽtrol on heavy, clayey soils than on light, sandy ones.
On The Other Hand See ProŽvide For Lawns:The area of Raleigh is I2yi square miles. It is not a city that displays extremes of wealth and poverty. Most of its homes are modest but comfortable, and built on grounds that proŽvide for lawns, trees, and flower gardens. BeŽcause of the magnificent oaks in the city, North Carolina's capital is sometimes called the City of Oaks.
Northern lawns, except those of creepŽing bent, are best cut to a height of one and a quarter to one and a half inches, or slightly higher on shaded areas and banks. In really hot weather raise the cutting height an extra half inch. Give the last mowing of the season so that the grass goes into winter two to three inches long. Lawns of creeping bent may be cut to a height of from one inch to less than half an inch.
Southern lawns of subtropical grasses are generally mowed to a height of one inch. Temporary winter lawns of ryegrass are cut at one and a quarter inches.
Mowing machines should be used when the grass is dry, scythes and sickles when it is slightly moist. For the kinds of mowers see Chapter 16.
|
