Remaining Walls In This: Ceilings may be calcimined or painted white or off-white. An agree¬able effect is obtained if the ceiling is treated in a lighter tint of the color used for the walls. Increase in color interest may be obtained by painting the ceiling a color contrasting, either in hue or in value, with the walls. Ceilings that are painted in a color darker than the walls or treated in gold or silver leaf tend toward a modern effect. If a definite color is used for the ceiling, it should be repeated elsewhere in the Decoration of the room.
Using two or more colors on the walls in the same room is always logical if the materials are different, such as wood panelling on one wall, and plaster on the other, or if one Wall is treated with wallpaper and the other with paint. A plaster Wall may be painted a different color than the woodwork. Where wallpaper is used in part of a room, it is advisable to paint the remaining plaster walls with the lightest and most neutral color used in the wallpaper. The Wall area can often be painted the wall¬paper-background color, or even more neutral in chroma. Where all walls are to be painted, decorators may use two colors; the window Wall is generally painted in a lighter tonal value than the opposite wall. In a double-use room (living room-dining room) an apparent division is often made by painting the walls different colors, and indicating the different uses thereby. Walls should not arbitrarily be painted different colors, but may be if there is a logical reason for so doing.
Continue to paint the rest of the first Wall and then the remaining walls in this order. Complete one Wall in full before you begin the next. To paint around a window, first paint around the frame with a small brush and then fill in the surrounding Wall space with a larger brush, roller, or pad. Once this is done, give the frames of first the door and then the window a top coat. Then paint the door of the room and add any covering to the Floor last. Paint the coving and baseboards after the ceiling and walls are completed.See Also Windows And Walls:Natural and synthetic Wall materials. There is a tendency today either through intention or unavoidable circumstance to find rooms in which the various walls and ceilings are made of two or more different materials. In many dwellings, certain portions of the interior walls are structural and built with permanent materials and must for reasons of economy remain as an element in the decorative treatment of the room in which they are located. Ceiling surfaces often vary from the walls due to the introduction of acoustical materials that have a rough texture. In modern planning, it is often possible to subdivide rooms by means of sliding or folding partitions that are made of materials that differ from the Wall surfaces. The popularity of built-in cabinets covering an entire Wall area, and glass Wall surfaces substituting for windows and walls, add to the variability of walls in the same room. These features create a problem that did not exist to the same extent in historical types of rooms in which similar types of walls were pierced by doors and windows and walls and compositional unity was attained by similarity of treatment on all four sides. The decorator must accept conditions such as these and must select and arrange the movable furnishings to harmonize with the permanent walls and partitions that have been installed by the builder of the house.
A one enters a room, the windows and walls and their treatment are, as a rule, the first features that are noticed. For practical reasons, windows and walls are necessary for light and ventilation. Architecturally, they relieve the monotony of unbroken Wall space both on the exterior and interior of the building. Physically their transparency relieves the eye muscles by occasionally permitting them to focus on a more distant view than the interior walls themselves permit.
On The Other Hand See Stone Walls That:Most of the production is done by a relatively few big companies. Tonnage breakdown by types of stone walls that in 1965 was: lime¬stone walls that, 732,000; granite, 786,000; standstone walls that, 396,-000; marble, 126,000; slate, 182,000; and miscel¬laneous, 155,000. Over 70 per cent is building stone walls that; the balance is used for monuments, curb¬ing, flagging, and paving.
Uses.—Among the constructional applications of dimension stone walls that are its uses in walls, piers, columns, trim, split stone walls that for homes, and in flooring. Future major expansion of the industry is unlikely, due to competition from cheaper materials that lend themselves better to mass pro¬duction.
Rural Districts. The supreme example is of¬fered by the Cotswolds, a stretch of hill country overlapping Oxfordshire, Wiltshire, and Glouces¬tershire, which grew rich on the medieval wool trade and surrounds a number of remarkably beautiful small country towns. Each town has a fine church and a redolence of prosperity—once of merchants, now of tourism and prosperous agriculture. The Cotswolds area is stone walls that country —dry stone walls that walls, stone walls that cottages, splendid stone walls that mansions, all set in hills so contoured and wooded by nature and art that they seem to form one enormous park.
|
